Tim Waugh escribió:
> 
> On Wed, Apr 04, 2001 at 12:59:33AM +0200, Juan wrote:
> 
> > I have the same problem in two different machines but they both are UP.
> > However, my kernel configuration has SMP support enabled.
> 
> Could you build a kernel without SMP support and see if the problem
> still happens?
Without SMP support, the machine doesn't hang but I can't load the ppa
module.
See messages below.

> 
> > options parport_pc io=0x378 irq=7
> 
> You could remove this line, just to see if it makes a difference (it
> shouldn't, but it might).
I will try this tomorrow.

> 
> > I stop klogd and syslogd services (that causes to display all kernel
> > messages on screen, doesn't it?
> 
> Better is something like 'dmesg -n 8'.
OK.

-- 
D. Juan Piernas Cánovas
Departamento de Ingeniería y Tecnología de Computadores
Facultad de Informática. Universidad de Murcia
Campus de Espinardo - 30080 Murcia (SPAIN)
Tel.: +34968367657    Fax: +34968364151
email: piernas@ditec.um.es
PGP public key:
http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.es&op=index[root@localhost /root]# modprobe ppa
ppa: Version 2.07 (for Linux 2.2.x)
WARNING - no ppa compatible devices found.
  As of 31/Aug/1998 Iomega started shipping parallel
  port ZIP drives with a different interface which is
  supported by the imm (ZIP Plus) driver. If the
  cable is marked with "AutoDetect", this is what has
  happened.
scsi : 0 hosts.
/lib/modules/2.2.19/scsi/ppa.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.2.19/scsi/ppa.o: insmod /lib/modules/2.2.19/scsi/ppa.o failed
/lib/modules/2.2.19/scsi/ppa.o: insmod ppa failed


There are the following lines in my modules.conf

alias scsi_hostadapter ppa
alias parport_lowlevel parport_pc
options parport_pc io=0x378 irq=7