[lkml]   [2001]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
I am having dificulty getting an ASIX AX88140 ethernet card to work under
the 2.4.3 kernel.
It works perfectly under a 2.2.19 kernel and is found properly, but when
trying the 2.4.3 kernel it fails with the message:

tulip: eth1: MMIO region (0x0@0x0) unavailable, aborting

tulip-diag still detects the card, here is the results of it under 2.4.3:

tulip-diag.c:v2.06 1/8/2001 Donald Becker (
Index #1: Found a Macronix 98715 PMAC adapter at 0xbc00.
Port selection is 10mpbs-serial 100baseTx scrambler, full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
Index #2: Found a ASIX AX88140 adapter at 0xc000.
Port selection is MII, half-duplex.
Transmit stopped, Receive stopped, half-duplex.
The Rx process state is 'Stopped'.
The Tx process state is 'Stopped'.
The transmit threshold is 128.
The MAC/filter registers are 18cac000 00007f8a 80000000 00000000.
Use '-a' or '-aa' to show device registers,
'-e' to show EEPROM contents, -ee for parsed contents,
or '-m' or '-mm' to show MII management registers.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:52    [W:0.021 / U:2.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site