Messages in this thread |  | | Date | Fri, 20 Apr 2001 06:17:04 +0200 (CEST) | | From | Per-Henrik Persson <> | | Subject | BP6: APIC, rtl8139 & sound |
| |
Hi,
I'v been lurking around all archives from this list trying to find an answer to my problem but with no success so I take the step ant mail it to this list.
My hardware setup is as following:
Abit BP6, 2xCeleron 366, G400, old Matrox-card, sym53c8xx SCSI, Trident 4DWave NX sound, rtl8139 NIC.
lspci: 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 00:09.0 Multimedia audio controller: Trident Microsystems 4DWave NX (rev 02) 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) 00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895 (rev 01) 00:0f.0 Display controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) 00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) 00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 03)
cat /proc/interupts: CPU0 CPU1 0: 79118 75272 IO-APIC-edge timer 1: 2261 2358 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 8: 0 1 IO-APIC-edge rtc 12: 33056 32767 IO-APIC-edge PS/2 Mouse 14: 3 22 IO-APIC-edge ide0 15: 8 24 IO-APIC-edge ide1 16: 0 0 IO-APIC-level mga@PCI:1:0:0 17: 100 94 IO-APIC-level sym53c8xx 18: 45894 45820 IO-APIC-level ide2, eth0 19: 38881 40110 IO-APIC-level usb-uhci, Trident 4DWave PCI NMI: 0 0 LOC: 154313 154315 ERR: 6994982
I recently made a full reinstall of my Debian-system, from scratch. I also upgraded to 2.4.3, ALSA for sound. Now I have a lot of problems!
When using my system, not using the NIC, not using sound I get some errors like:
APIC error on CPU0: 02(02) APIC error on CPU1: 01(01) APIC error on CPU0: 02(02) APIC error on CPU1: 01(01)
If i start to use the NIC, like som browsing on the internet i occassionly get:
eth0: Too much work at interrupt, IntrStatus=0x0001.
The number of that kind of messages increases with harder network traffic. A floodping TO my computer generates like 50 messages...
If I then start to use the sound (playing MP3's) i sometimes get _small_ lockups when X won't respond. If I at the same time generate some activity on the harddisk connected to IDE2 I get longer lockups. A "cat /proc/interupts" shows that I get a lot of interupt errors :(
Every now and then i get a lockup for like 10 seconds and as you can see from my /proc/interupts above I get MILLIONS of interrupt errors! A "dmesg" will give me an infinite stream of APIC-errors...
Do anyone have a solution for my problem?
Last but not least, I haven't joined the kernel-list because I have some troubles with the internet connection to my mailserver. Would it be possible to CC all answers to ph@whatever.nu ?
Thanx in advance,
P-H
******************************************************************************** Per-Henrik Persson 0703-68 53 86 vajper@whatever.nu http://www.whatever.nu -stupid webcam online 24h a day "With digital it's all or nothing!" "Just because something doesn't work, it doesn't mean it can't be used..." ********************************************************************************
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |