[lkml]   [2001]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
No this error is not by the wrong DMA settings.  If you have a drive in dma 
mode 5 and the controller does not support it, the kernel will give you a
proper error saying that this dma mode is not supported by the
controller. This is most likly something with the kernel. I'd try
upgrading to the latest 2.4.2-ac?? series.

Let me know if I'm mistaken about this one guys...


At 06:14 PM 3/5/2001 -0800, Mike Fedyk wrote:
>Shane Wegner wrote:
> >
> > Hi,
> >
> > Whenever I write a substantial amount of data (200mb) to
> > disk, I get these messages. The disks lock for about 10
> > seconds and then come back for about 10 seconds again.
> > This continues until the data is successfully written.
> >
> > ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> > hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> > hde: DMA disabled
>It looks like you have set your drive for a dma mode it doesn't support.
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to
>More majordomo info at
>Please read the FAQ at

- - -
Jasmeet Sidhu
Unix Systems Administrator
ArrayComm, Inc.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:22    [W:0.040 / U:2.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site