Messages in this thread | | | Date | Fri, 02 Mar 2001 21:34:57 -0700 | From | TimO <> | Subject | OOPS-kernel 2.4.3-pre1 |
| |
[1] Oops when booting kernel 2.4.3-pre1
[2] Kernel oopses just after starting kswapd
[3] [4] Linux nexxus.deenc.com 2.4.3-pre1 #2 Tue Jan 30 12:32:52 MST 2001 i686 unknown
Gnu C 2.95.2 Gnu make 3.79 binutils 2.10.1 util-linux 2.10r modutils 2.4.3 e2fsprogs 1.19 PPP 2.3.10 not used Linux C Library 2.1.3 Dynamic linker (ldd) 2.1.3 Linux C++ Library 2.8.1 Procps 2.0.6 Net-tools 1.55 Kbd 0.94 Sh-utils 2.0 Modules Loaded None at oops time
[5] ksymoops 2.3.5 on i686 2.4.1. Options used -v /usr/src/linux/vmlinux (specified) -K (specified) -l /proc/modules (default) -o /lib/modules/2.4.1/ (default) -m /boot/System.map-2.4.3-pre1 (specified)
No modules in ksyms, skipping objects No ksyms, skipping lsmod Unable to handle kernel NULL pointer dereference at virtual address 00000004 c0142a52 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c0142a52>] Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010286 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: c12ef840 edi: c12f1e28 ebp: c122e800 esp: c122bf18 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 1, stackpage=c122b000) Stack: 00000000 c12f1e28 00000001 c122e800 c0142ca6 c122e800 00000001 c12f1e28 00000000 00000000 c0200d80 c122e800 00000000 c0201440 c0145f01 c122e800 00000001 00000000 00000000 c122e800 c122e800 c014601a c122e800 00000001 Call Trace: [<c0142ca6>] [<c0145f01>] [<c014601a>] [<c01349a4>] [<c0134f7a>] [<c0107007>] [<c01074b8>] Code: 83 78 04 00 74 10 8b 54 24 24 52 56 8b 40 04 ff d0 83 c4 08
>>EIP; c0142a52 <get_new_inode+b2/160> <===== Trace; c0142ca6 <iget4+b6/d0> Trace; c0145f01 <proc_get_inode+41/120> Trace; c014601a <proc_read_super+3a/b0> Trace; c01349a4 <read_super+104/180> Trace; c0134f7a <kern_mount+2a/80> Trace; c0107007 <init+7/110> Trace; c01074b8 <kernel_thread+28/40> Code; c0142a52 <get_new_inode+b2/160> 00000000 <_EIP>: Code; c0142a52 <get_new_inode+b2/160> <===== 0: 83 78 04 00 cmpl $0x0,0x4(%eax) <===== Code; c0142a56 <get_new_inode+b6/160> 4: 74 10 je 16 <_EIP+0x16> c0142a68 <get_new_inode+c8/160> Code; c0142a58 <get_new_inode+b8/160> 6: 8b 54 24 24 mov 0x24(%esp,1),%edx Code; c0142a5c <get_new_inode+bc/160> a: 52 push %edx Code; c0142a5d <get_new_inode+bd/160> b: 56 push %esi Code; c0142a5e <get_new_inode+be/160> c: 8b 40 04 mov 0x4(%eax),%eax Code; c0142a61 <get_new_inode+c1/160> f: ff d0 call *%eax Code; c0142a63 <get_new_inode+c3/160> 11: 83 c4 08 add $0x8,%esp
kernel panic: Attempted to kill init!
[6] [7] [7.2] processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : AMD Athlon(tm) Processor stepping : 2 cpu MHz : 751.714 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1500.77
[7.5] nexxus:/usr/src/linux# lspci -vvv 00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [PCI-PCI Bridge] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d4000000-d5ffffff Prefetchable memory behind bridge: d6000000-d7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo Super AC97/Audio] (rev 20) Subsystem: Analog Devices: Unknown device 5340 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 9 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at e000 [size=4] Region 2: I/O ports at e400 [size=4] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (4250ns min, 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e800 [size=256] Region 1: Memory at d9001000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=<none>
[7.6] nexxus:/usr/src/linux# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ARCHIVE Model: VIPER 150 21247 Rev: -011 Type: Sequential-Access ANSI SCSI revision: 01 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: TANDBERG Model: TDC 3800 Rev: =04: Type: Sequential-Access ANSI SCSI revision: 02
[7.7] ----------VIA BusMastering IDE Configuration---------------- Driver Version: 2.1e South Bridge: VIA vt82c686a rev 0x22 Command register: 0x7 Latency timer: 32 PCI clock: 33MHz Master Read Cycle IRDY: 0ws Master Write Cycle IRDY: 0ws FIFO Output Data 1/2 Clock Advance: off BM IDE Status Register Read Retry: on Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: on on End Sect. FIFO flush: on on Prefetch Buffer: on on Post Write Buffer: on on FIFO size: 8 8 Threshold Prim.: 1/2 1/2 Bytes Per Sector: 512 512 Both channels togth: yes yes -------------------drive0----drive1----drive2----drive3----- BMDMA enabled: yes yes no no Transfer Mode: UDMA UDMA DMA/PIO DMA/PIO Address Setup: 30ns 30ns 90ns 60ns Active Pulse: 90ns 90ns 300ns 90ns Recovery Time: 30ns 30ns 300ns 60ns Cycle Time: 30ns 60ns 600ns 150ns Transfer Rate: 66.0MB/s 33.0MB/s 3.3MB/s 13.2MB/s
Sorry, no patch.
--- TimO - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |