lkml.org 
[lkml]   [2001]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 2.2.18 IDE tape problem, with ide-scsi
    From
    Date
    Thank you again, so much!

    Take care,

    Khalid Aziz <khalid@fc.hp.com> writes:

    > 11,3 is "Multiple read errors". You can find all of the ASC and ASCQ
    > listed in any SCSI spec document. You can find the SCSI-2 specs at
    > <ftp://ftp.t10.org/t10/drafts/s2/s2-r10l.pdf>.
    >
    > --
    > Khalid
    >
    > Camm Maguire wrote:
    > >
    > > Thank you again for your help. While I do seem to get more errors
    > > with the ide-tape driver, I am also seeing some problems on further
    > > examination which are common to both ide-tape and st over ide-scsi, so
    > > perhaps I have a bad drive or tape.
    > >
    > > When trying to mt eom, for example, I get
    > >
    > > =============================================================================
    > > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
    > > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
    > > ASC=20 ASCQ= 0
    > > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    > > st0: Can't read block limits.
    > > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
    > > st0: Density 45, tape length: 0, drv buffer: 1
    > > st0: Block size: 512, buffer size: 32768 (64 blocks).
    > > st0: Retensioning tape.
    > > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
    > > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
    > > ASC=20 ASCQ= 0
    > > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    > > st0: Can't read block limits.
    > > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
    > > st0: Density 45, tape length: 0, drv buffer: 1
    > > st0: Block size: 512, buffer size: 32768 (64 blocks).
    > > st0: Spacing tape forward over 16383 filemarks.
    > > st0: Spacing to end of recorded medium.
    > > st0: Error: 28000000, cmd: 11 3 0 0 0 0 Len: 16
    > > Info fld=0x3feb, Deferred st09:00: sns = f1 3
    > > ASC=11 ASCQ= 3
    > > Raw sense data:0xf1 0x00 0x03 0x00 0x00 0x3f 0xeb 0x0a 0x00 0x00 0x00 0x00 0x11 0x03 0x00 0x00
    > > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
    > > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
    > > ASC=20 ASCQ= 0
    > > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    > > st0: Can't read block limits.
    > > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
    > > st0: Density 45, tape length: 0, drv buffer: 1
    > > st0: Block size: 512, buffer size: 32768 (64 blocks).
    > > st0: Rewinding tape.
    > > =============================================================================
    > >
    > > What is the 11,3? Where can I find these codes listed? Why is the
    > > drive having trouble finding the end of the tape? I'll be testing
    > > more tapes soon, but this definitely happens with at least several.
    > > The mt command returned to the prompt with 'Input/ouput error'.
    > >
    > > Many Thanks again,
    > >
    >
    > --
    > ====================================================================
    > Khalid Aziz Linux Development Laboratory
    > (970)898-9214 Hewlett-Packard
    > khalid@fc.hp.com Fort Collins, CO
    >
    >

    --
    Camm Maguire camm@enhanced.com
    ==========================================================================
    "The earth is but one country, and mankind its citizens." -- Baha'u'llah
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:29    [W:4.914 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site