lkml.org 
[lkml]   [2001]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectPROBLEM: mount -o loop of ISO image lockup
Date
[1.] mount -o loop of ISO image lockup
[2.] mount of an ISO image created with mkisofs and correctly read and
verified by isoread and isovrfy locks ; nothing is reported my mount, and it
is unkillable ; the line is reported by ps this way:

root 4378 0.0 0.5 1508 1508 pts/12 DL 13:17 0:00 mount -o loop
-t iso9660 image.iso /mnt/cdrom/

[3.] kernel, mount, loop, iso9660
[4.] 2.4.2
[5.] N/A
[6.] mount -o loop -t iso9660 image.iso /mnt/cdrom/
[7.]
[7.1.]
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux f-ammollo 2.4.2 #12 Thu Feb 22 11:11:08 CET 2001 i686 unknown
Kernel modules 2.3.21
Gnu C 2.96
Gnu Make 3.79.1
Binutils 2.10.0.18
Linux C Library > libc.2.2
Dynamic linker ldd (GNU libc) 2.2
Procps 2.0.7
Mount 2.10m
Net-tools 1.56
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded loop mad16 ad1848 uart401 sound soundcore
nls_iso8859-1 nls_cp437 vfat fat 3c59x
[7.2.]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Celeron (Covington)
stepping : 1
cpu MHz : 300.689
cache size : 32 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 599.65
[7.3.]
loop 7552 2 (autoclean)
mad16 7904 0 (autoclean)
ad1848 17376 0 (autoclean) [mad16]
uart401 6320 0 (autoclean) [mad16]
sound 57200 0 (autoclean) [mad16 ad1848 uart401]
soundcore 3760 4 (autoclean) [sound]
nls_iso8859-1 2864 1 (autoclean)
nls_cp437 4384 1 (autoclean)
vfat 11248 1 (autoclean)
fat 31104 0 (autoclean) [vfat]
3c59x 23424 1 (autoclean)
[7.4.]
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0530-0533 : MAD16 WSS config
0534-0537 : MAD16 WSS
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e43f : 3Com Corporation 3c900 10BaseT [Boomerang]
e400-e43f : eth0
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0fffffff : System RAM
00100000-001be14d : Kernel code
001be14e-001fffef : Kernel data
d0000000-dfffffff : Intel Corporation 440LX/EX - 82443LX/EX Host bridge
e8000000-efffffff : PCI Bus #01
e8000000-ebffffff : S3 Inc. Trio 64 3D
ffff0000-ffffffff : reserved
[7.5.]
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e8000000-efffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if
00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 0
Region 4: I/O ports at e000 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:09.0 Ethernet controller: 3Com Corporation 3c900 10BaseT [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e400 [size=64]
Expansion ROM at f0000000 [disabled] [size=64K]

01:00.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) (prog-if 00
[VGA])
Subsystem: CardExpert Technology: Unknown device 8904
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] N/A
[7.7.]
[X.] N/A

Sorry if this not the totally right way of reporting a problem, but it's the
first time I do it.

TIA

--
Bye,
Fabrizio Ammollo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:17    [W:0.040 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site