Messages in this thread |  | | From | "Dunlap, Randy" <> | Subject | RE: IDE timeouts 2.4.1 | Date | Fri, 2 Feb 2001 19:48:21 -0800 |
| |
I'm also getting a ton of these, along with lots of file corruption. I could handle the timeouts and rebooting every once in awhile if I didn't also have the corruption.
Do I have some incorrect IDE parameters?
(using 2.4.0, not 2.4.1) dual Pentium III 933 MHz (STL2 board) SAMSUNG 20 GB IDE hard drive ServerWorks chipset
details----------------------------------
Feb 2 19:34:51 localhost kernel: Linux version 2.4.0 (rdunlap@localhost.localdomain) (gcc version 2.95.3 19991030 (prerelease)) #34 SMP Tue Jan 30 17:49:24 PST 2001 Feb 2 19:35:00 localhost kernel: DMI table at 0x000EF5C0. Feb 2 19:35:00 localhost kernel: BIOS Vendor: Intel Corporation Feb 2 19:35:01 localhost kernel: BIOS Version: STL20.86B.0016.P01.0010111108 Feb 2 19:35:01 localhost kernel: BIOS Release: 10/11/2000 Feb 2 19:35:01 localhost kernel: System Vendor: Intel. Feb 2 19:35:01 localhost kernel: Product Name: STL2. Feb 2 19:35:01 localhost kernel: Version . Feb 2 19:35:01 localhost kernel: Serial Number . Feb 2 19:35:01 localhost kernel: Board Vendor: Intel. Feb 2 19:35:01 localhost kernel: Board Name: STL2. Feb 2 19:35:01 localhost kernel: Board Version: 133-639718. Feb 2 19:35:01 localhost kernel: Asset Tag: 0000000000000000. Feb 2 19:35:01 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Feb 2 19:35:02 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: chipset revision 0 Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: not 100% native mode: will probe irqs later Feb 2 19:35:02 localhost kernel: hda: SAMSUNG SV2006D fc2_17, ATA DISK drive Feb 2 19:35:02 localhost kernel: hdb: TOSHIBA CD-ROM XM-6402B, ATAPI CDROM drive Feb 2 19:35:02 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 2 19:35:02 localhost kernel: hda: 40142592 sectors (20553 MB) w/480KiB Cache, CHS=2498/255/63 Feb 2 19:35:02 localhost kernel: hdb: ATAPI 32X CD-ROM drive, 256kB Cache Feb 2 19:35:02 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Feb 2 19:35:02 localhost kernel: Partition check: Feb 2 19:35:02 localhost kernel: hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
/dev/hda: Model=SAMSUNG SV2006D fc2_17, FwRev=LS100, SerialNo=V7**BT0521 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=DualPortCache, BuffSize=480kB, MaxMultSect=16, MultSect=off CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=40142592 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 *mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
/dev/hda: I/O support = 0 (default 16-bit)
CPU0 CPU1 0: 15519 9063 IO-APIC-edge timer 1: 404 289 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 12: 0 0 IO-APIC-edge PS/2 Mouse 14: 21517 20366 IO-APIC-edge ide0 18: 138 121 IO-APIC-level eth0 NMI: 24511 24512 LOC: 24491 24492 ERR: 0
00:0f.1 IDE interface: Relience Computer: Unknown device 0211 (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Region 4: I/O ports at 5440 [size=16]
~Randy_________________________________________ ________________________________________ Michael D. Black wrote: Happens every night on both hda and hdc -- no sure yet what triggers it but it is repeatable. Has happened since I've installed this machine with all the 2.4.x series. Jan 31 00:34:16 kernel: hdc: timeout waiting for DMA Jan 31 00:34:16 kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jan 31 00:34:16 kernel: hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } Jan 31 00:34:26 kernel: hdc: timeout waiting for DMA Jan 31 00:34:26 kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jan 31 00:34:26 kernel: hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } Jan 31 00:34:36 kernel: hdc: timeout waiting for DMA Jan 31 00:34:36 kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jan 31 00:34:36 kernel: hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } Jan 31 00:34:46 kernel: hdc: timeout waiting for DMA Jan 31 00:34:46 kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Jan 31 00:34:46 kernel: hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } Jan 31 00:34:46 kernel: hdc: DMA disabled Jan 31 00:34:46 i kernel: ide1: reset: success
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |