lkml.org 
[lkml]   [2001]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] change awe_wave initialization to match 2.2 better
The awe_wave driver in 2.2 looked at the common I/O ports for
the card if no parameters were specified. The 2.4 driver currently
does an ISAPnP probe, but doesn't fall back to the previous probing
behavior, which means that users with working module configurations
will have theirs broken on upgrade.

The attached fixes it to fall back to 2.2-style behavior if no
parameters are specified; if 'isapnp=1' is specified, it does
not try to look for cards if the ISAPnP probe fails.

Bill
--- linux/drivers/sound/awe_wave.c.foo Mon Feb 19 14:05:47 2001
+++ linux/drivers/sound/awe_wave.c Mon Feb 19 14:06:51 2001
@@ -206,7 +206,7 @@
int io = AWE_DEFAULT_BASE_ADDR; /* Emu8000 base address */
int memsize = AWE_DEFAULT_MEM_SIZE; /* memory size in Kbytes */
#if defined CONFIG_ISAPNP || defined CONFIG_ISAPNP_MODULE
-static int isapnp = 1;
+static int isapnp = -1;
#else
static int isapnp = 0;
#endif
@@ -4838,10 +4838,12 @@
if (isapnp) {
if (awe_probe_isapnp(&io) < 0) {
printk(KERN_ERR "AWE32: No ISAPnP cards found\n");
- return 0;
+ if (isapnp != -1)
+ return 0;
+ } else {
+ setup_ports(io, 0, 0);
+ return 1;
}
- setup_ports(io, 0, 0);
- return 1;
}
#endif /* isapnp */
\
 
 \ /
  Last update: 2005-03-22 13:17    [W:0.042 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site