lkml.org 
[lkml]   [2001]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 8139 full duplex?
Date
From
Jeff Garzik wrote:
> On Fri, 16 Feb 2001, Rogier Wolff wrote:
> > I have a bunch of computers with 8139 cards. When I moved the cables
> > over from my hub to my new switch all the "full duplex" lights came on
> > immediately.
> >
> > Would this mean that the driver/card already were in full-duplex? That
> > would explain me seeing way too many collisions on that old hub (which
> > obviously doesn't support full-duplex).
> >
> > (Some machines run 2.2 kernels, others run 2.4 kernels some run the
> > old driver, others run the 8139too driver).
>
> Some versions of the driver bork the LED register, which may lead to
> false assumptions.

Does the driver control the led on my switch?????

(My cards just have a "link" led, and a "100Mbps" led)

I'm not going back to the hub after upgrading just to see the
changeover messages. I'm confident that we're running full-duplex now
on the switch and that that's OK with the switch. I was just wondering
wether this confirmed my suspicion that there was something wrong with
the /duplexicity/.

Roger.

--
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots.
* There are also old, bald pilots.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:15    [W:0.214 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site