Messages in this thread | | | Date | Fri, 16 Feb 2001 17:46:30 -0800 (PST) | From | "Mr. James W. Laferriere" <> | Subject | Re: kernel 2.4.0/1/1-ac15 and ncr53c810a |
| |
Hello Wolfgang & J.A. ,
On Sat, 17 Feb 2001, J . A . Magallon wrote: > On 02.17 Wolfgang Teichmann wrote: > > Hello, > > I have problems using my scanner (HP C6270A connected to ncr53c810a) > > with xsane. > > I always get the error message: > > error during read: Error during device I/O > > Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0, > > channel 0, id 4, lun 0, type 3 > Try disabling 'Initiate sync negotitation' in the card BIOS for the ID of > the scanner. There is no Bios on an 810/810a . There is a way to tell the driver not to 'initiate Sync' & I'd prolly recommend disabling 'disconnect' as well . UNLESSS you have -any- other device on the 810's scsi bus . Please see : linux/drivers/scsi/EADME.ncr53c8xx Hth , JimL +----------------------------------------------------------------+ | James W. Laferriere | System Techniques | Give me VMS | | Network Engineer | 25416 22nd So | Give me Linux | | babydr@baby-dragons.com | DesMoines WA 98198 | only on AXP | +----------------------------------------------------------------+
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |