Messages in this thread | | | Date | Sat, 17 Feb 2001 02:06:05 +0100 | From | (Wolfgang Teichmann) | Subject | kernel 2.4.0/1/1-ac15 and ncr53c810a |
| |
Hello,
I have problems using my scanner (HP C6270A connected to ncr53c810a) with xsane.
I always get the error message:
error during read: Error during device I/O
Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0, channel 0, id 4, lun 0, type 3 Feb 15 23:57:27 localhost kernel: ncr53c810a-0-<4,*>: target did not report SYNC. Feb 15 23:58:01 localhost kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 4, lun 0 Read (6) 00 00 7b 66 00 Feb 15 23:58:01 localhost kernel: ncr53c8xx_abort: pid=0 serial_number=1099 serial_number_at_timeout=1099 Feb 15 23:58:04 localhost kernel: SCSI host 0 abort (pid 0) timed out - resetting Feb 15 23:58:04 localhost kernel: SCSI bus is being reset for host 0 channel 0. Feb 15 23:58:04 localhost kernel: ncr53c8xx_reset: pid=0 reset_flags=2 serial_number=1099 serial_number_at_timeout=1099 Feb 15 23:58:04 localhost kernel: ncr53c810a-0: restart (scsi reset).
With kernel 2.2.x I have no problems accessing the scanner with xsane.
Any idea?
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |