[lkml]   [2001]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject2001-02-14 release of hotplug scripts
I've just packaged up the latest hotplug scripts into a release, and
they can be found at:
depending on which format you prefer.

Changes in this version from the last release are:
- rpm makes the subsystem scripts executable
- some logging fixes
- insistence on having a writable /tmp so bash works properly
- added support for pcimodules
- Fixes some problems seen with Redhat 7 systems when the
partial USB setup in /etc/rc.sysinit was not disabled. The
failure mode was that all USB modules got loaded, rather than
only modules for the devices that were connected.
- In conjunction with the "usbmodules" and "pcimodules" patches
to "usbutils-0.7" and "pciutils-2.1.8", devices that are
connected at boot time will also be configured. If you don't
have those utilities, you'll need to plug USB and CardBus
devices in after the system is booted, otherwise they can't be
properly configured.
- other small fixes.

If you haven't patched your version of usbutils and pciutils, you can
get the patch at:

Hopefully updated versions of these two packages will be released with
these changes in them soon.


greg k-h

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:14    [W:0.033 / U:1.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site