lkml.org 
[lkml]   [2001]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: IDE DMA Problems...system hangs
Date
Alan Cox wrote: 
>> Feb 13 05:23:27 bertha kernel: hdo: dma_intr: status=0x51 { DriveReady
>> SeekComplete Error }
>> Feb 13 05:23:27 bertha kernel: hdo: dma_intr: error=0x84 { DriveStatusError
>> BadCRC }
>
>You have inadequate cabling. CRC errors are indications of that. Make sure you
>are using sufficiently short cables for ATA33 and proper 80pin ATA66 cables.

I've had cases (on VIA chipsets) where, even or ATA33, a 40-pin cable
caused CRC errors for ATA33 and an 80-pin cable fixed things. (The same
40-pin cable does ATA33 without problems on an AMD 750 or an Intel BX,
though.)

IIRC, Andre Hedrick has said in the past that a marginal PSU or
motherboard can also cause CRC errors.

-Barry K. Nathan <barryn@pobox.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:14    [W:0.110 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site