On Thu, 6 Dec 2001, Christian Lavoie wrote:

> 2.4.17-pre5 + ext3-2.4.17-pre2 will not boot on a Cyrix 6x86 P150+ (133mhz)
> with 64 megs of RAM (I believe the bios to be an AwardBIOS)
>
> Backing out all changes in arch/i386/kernel (changes from pre4 to pre5)
> allows to boot again. (I'm now writing this under -pre5 on the machine in
> question)

This doesn't make a lot of sense, as..

1. the dmi_scan changes shouldn't apply to your system unless you've
   found a way to crowbar a 6x86 into a board with a l440GX chipset.
2. The Athlon SSE support is in an Athlon only path, so that never gets
   run on your box
3. The P4 HT support is in CONFIG_SMP ifdefs, so never even got compiled
   in.  Likewise the smpboot.c changes.

*stumped*.
Can you rebuild from a clean tarball, patch straight up to pre5
and try and reproduce this ? I'm betting it won't happen and you had
some cruft from an old build making things go awry.

Dave.

-- 
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/