Messages in this thread | | | From | Graham TerMarsch <> | Subject | Re: [Linux-usb-users] VIA Chipsets + USB + SMP == UGLY TRASH | Date | Mon, 24 Dec 2001 11:26:43 -0800 |
| |
On Monday 24 December 2001 10:47, Greg KH wrote: > On Mon, Dec 24, 2001 at 10:32:49AM +0100, Juergen Sauer wrote: > > Hi! > > Merry X-Mas everywhere ! > > > > So, my USB tryout is over. > > This is the expierience report: > > You should not try to use VIA Chipsets + SMP + USB, that's > > the worst thinkable idea. It's junk (usb-Part). > > Depends on the motherboard. What one do you have?
I've had similar problems here on an AOpen AK73Pro(A) motherboard. Its a single-processor board based on KT133A, and since 2.4.3 haven't been able to get USB working on it at all.
Dug through the old USB-users mailing lists and tried a wide variety of things; "noapic", changing IRQs, PnP On/Off in the BIOS, but had no luck. Best I was able to discern was that the board is using MPS1.4 but has no option in the BIOS to switch it back to MPS1.1.
Would love to get it working so that I could finally get my Epson1200U scanner working again, but am out of things to try (any suggestions would be MORE than welcome).
> > That's why: > > 1. not solved USB Irq errors in APIC mode, causes: > > Error -110, device does not accept ID
Exactly the same error I'm getting here. Doesn't matter whether its the USB scanner or printer that I plug in to the USB ports, I always end up getting that error.
-- Graham TerMarsch Howling Frog Internet Development, Inc. http://www.howlingfrog.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |