lkml.org 
[lkml]   [2001]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectscsi acard AEC6712D and atp870u.c driver
*please cc the answers to me*


hello

i am using an acer scanwit scanner which comes with the acard AEC6712D
scsi controller.
i am also using the acard driver in 2.4.7 (also tried 2.4.13). ejecting
the scanner seems to work (no data sent),
but scanning and previewing seems to cause problems.

it seems to be the driver that is causing the problems. when it
eventually times out,
i get:

scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Write (10) 00 82 00 00 01 00 1d e2 00
working=1 last_cmd=0 quhdu=1a quendu=1a r 0= a r 1=2c r 2=cf r 3=2a r
4= 0 r 5=82 r 6= 0 r 7= 0 r 8= 1 r 9= 0 r a=1d r b=e2 r c= 0 r d= 0 r e=
0 r f= 0 r10=3a r11=20 r12= 0 r13= 0 r14= 2 r15=20 r16=80 r1c= 0 r1f=35
in_snd= 0 r20= 1 r22= 8 r3a=2b
r3b=20

que cdb= 2a 0 82 0 0 1 0 1d e2 0 last_lenu= 1de2

i have gotten some suggestions such as

removing

if (dev->ata_cdbu[0] == READ_CAPACITY) {
if (workrequ->request_bufflen > 8) {
workrequ->request_bufflen = 0x08;
}
}

from the driver code, but this just causes the target id (as seen above to be: 0) to be the last command
so the command it got before was 0xff

as seen from
if ((j & 0x40) != 0)
{
if (dev->last_cmd == 0xff)
{
dev->last_cmd = target_id;
}
dev->last_cmd |= 0x40;
}

any ideas on what the problem might be? when was the lastest bug update on atp870u.c?


thanx,

*please cc the answers to me*

--sam


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:14    [W:0.027 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site