[lkml]   [2001]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectAMD Viper IDE chipset
    I'm currently using the Tyan Tiger mobo with the AMD Viper chipset. On past
    kernels 2.4.14 and before definatly, hdparm -t gave me 3.8MB/s on my ATA100
    drive. Using some IDE patch taht I'd found on the web, I was able to get to
    28MB/s and 38MB/s with some tweaking. Now with the 2.4.16 kernel, I get
    28MB/s which is a good improvement, but my drive is only being detected as
    UDMA33, I have not tried forcing it to UDMA66 or UDMA100 like I had with the
    IDE patch I found which had the same detecting problem. It seems that the
    mode detection is broken, but the actual interface code is functioning.
    Anyone else having similar problems? I'm using the IBM 60GB 75GXP drive.

    -Matt Schulkind

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:13    [W:2.286 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site