lkml.org 
[lkml]   [2001]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] floppy.c #defines
On Sun, 2 Dec 2001, Eric Lammerts wrote:

>
> On Sun, 2 Dec 2001, Zwane Mwaikambo wrote:
>
> > -#define ECALL(x) if ((ret = (x))) return ret;
> > +#define ECALL(x) if ((ret = (x))) return ret
>
> To prevent a dangling else problem, better make that
>
> #define ECALL(x) do { if ((ret = (x))) return ret; } while(0)
>
> Eric
>

hmm in that case, there are all sorts of other ones in there... Most
of them are for cutting down on typing instead of an internal API of
sorts.

--- linux-2.5.1-pre5/drivers/block/floppy.c Sun Dec 2 14:26:22 2001
+++ linux-2.5.1-pre5-test/drivers/block/floppy.c Sun Dec 2 16:26:56 2001
@@ -495,8 +495,8 @@
static DECLARE_WAIT_QUEUE_HEAD(command_done);

#define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
+#define CALL(x) do {if ((x) == -EINTR) return -EINTR;} while(0)
+#define ECALL(x) do {if ((ret = (x))) return ret;} while(0)
#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
#define WAIT(x) _WAIT((x),interruptible)
#define IWAIT(x) _WAIT((x),1)
@@ -549,7 +549,7 @@
* reset doesn't need to be tested before sending commands, because
* output_byte is automatically disabled when reset is set.
*/
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
+#define CHECK_RESET do { if (FDCS->reset){ reset_fdc(); return; } } while(0)
static void reset_fdc(void);

/*
@@ -663,23 +663,8 @@
timeout_message = message;
}

-static int maximum(int a, int b)
-{
- if (a > b)
- return a;
- else
- return b;
-}
-#define INFBOUND(a,b) (a)=maximum((a),(b));
-
-static int minimum(int a, int b)
-{
- if (a < b)
- return a;
- else
- return b;
-}
-#define SUPBOUND(a,b) (a)=minimum((a),(b));
+#define INFBOUND(a,b) ((a)=max((a),(b)))
+#define SUPBOUND(a,b) ((a)=min((a),(b)))


/*
@@ -899,7 +884,7 @@
#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)

#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+do {if (lock_fdc(drive,interruptible)) return -EINTR;} while(0)


/* unlocks the driver */
@@ -1176,7 +1161,7 @@
}
return -1;
}
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
+#define LAST_OUT(x) do {if (output_byte(x)<0){ reset_fdc();return;}} while(0)

/* gets the response from the fdc */
static int result(void)
@@ -2474,12 +2459,12 @@
int size;

max_sector = transfer_size(ssize,
- minimum(max_sector, max_sector_2),
+ min(max_sector, max_sector_2),
CURRENT->nr_sectors);

if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
buffer_max > fsector_t + CURRENT->nr_sectors)
- current_count_sectors = minimum(buffer_max - fsector_t,
+ current_count_sectors = min(buffer_max - fsector_t,
CURRENT->nr_sectors);

remaining = current_count_sectors << 9;
@@ -2497,7 +2482,7 @@
}
#endif

- buffer_max = maximum(max_sector, buffer_max);
+ buffer_max = max(max_sector, buffer_max);

dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);

@@ -2653,7 +2638,7 @@
if ((_floppy->rate & FD_2M) && (!TRACK) && (!HEAD)){
max_sector = 2 * _floppy->sect / 3;
if (fsector_t >= max_sector){
- current_count_sectors = minimum(_floppy->sect - fsector_t,
+ current_count_sectors = min(_floppy->sect - fsector_t,
CURRENT->nr_sectors);
return 1;
}
@@ -3506,7 +3491,7 @@
/* copyin */
CLEARSTRUCT(&inparam);
if (_IOC_DIR(cmd) & _IOC_WRITE)
- ECALL(fd_copyin((void *)param, &inparam, size))
+ ECALL(fd_copyin((void *)param, &inparam, size));

switch (cmd) {
case FDEJECT:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:13    [W:0.037 / U:11.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site