[lkml]   [2001]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Oops when syncing Sony Clie 760 with USB cradle
sure i try a patch no problem. Especially because my Clie just did a 
hard-reset :-( -- no clue why -- But I am glad when the syncing works
again so i can get my data back on ;-)

See you later

Greg KH wrote:

> On Wed, Nov 07, 2001 at 12:23:27AM +0100, Stephan Gutschke wrote:
>>there you go, the output from /proc/bus/usb/devices
>>By the way I have an Clie N710C which is upgraded
>>to an 760 with OS 4.1S, shouldnt make a difference,
>>but I just wanted to let you know.
> Ah, that might make the difference. It looks like the number of
> endpoints is different on this device, than any other 4.x Clie devices
> (they should have 4 bulk endpoints.) The older devices have 2 endpoints
> (endpoints are usually done in hardware)
> This Clie is reporting to the driver that it _does_ have 2 "ports" (a
> port is 2 endpoint pairs in this scheme), but in reality, it doesn't.
> The lying device is then causing the driver to oops when it tries to
> write to a port that isn't even there.
> I'm going to have to rework the driver to fix this problem, give me a
> day or so to come up with a solution. Are you willing to try a patch
> when I have something?
> Thanks for the good error reporting, it really helped.
> greg k-h

Stephan Gutschke

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:12    [W:0.167 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site