[lkml]   [2001]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: usb-storage fails with datafab md2-usb (ide hdd on usb) on newer kernels >2.4.8
On Wed, Nov 14, 2001 at 12:41:23AM +0100, Christoph Kampe wrote:
... very much, but not the Problemdescription.

Hi again,
sorry i forget to write what went wrong with the DataFab Storage.

Actually, with 2.4.8 when i connect the usb-storage it loads all
necessary modules and a mount takes less then 1second.

With 2.4.15-pre4 it loads the three modules too but, it gives
> kernel: usb-storage: *** thread sleeping.
> kernel: scsi: device set offline - not ready or command retry failed after
> bus reset: host 0 channel 0 id 0 lun 0
> kernel: I/O error: dev 08:05, sector 0
in my log.
as i wrote in my last mail (last 10 lines)
a mount won´t work, takes some time and breaks with
"I/O error:dev 08:05, sector 0"

I dont´t know exactly if it fails because of the usb-storage or the
scsi_mod module.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:13    [W:0.024 / U:3.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site