Messages in this thread |  | | From | "conway, heather" <> | Date | Tue, 9 Oct 2001 15:16:20 -0400 |
| |
Andre, There is a problem in the SCSI scanning code in v2.4.7 and up. As of right now, I have not found a patch or fix that will work to correct the problem of scanning properly with or without the Symmetrix. In v2.4.7, the SCSI scanning code was changed. That coupled with the fact that sequentail scanning is used instead of a REPORT_LUNs and the fact that the SCSI midlayer will scan indefinitely for LUNs can cause a panic or can cause the host to scan indefinitely. There have been a couple of patches posted, but none have fixed the problem yet. Heather
-----Original Message----- From: Andre Margis To: linux-kernel@vger.kernel.org Sent: 10/8/01 9:50 AM Subject: EMC SYMMETRIX multiple LUN's
I testing DELL 8450 under Linux, and kernel probe only two LUN's from EMC, 0 and 1, but I have 2 and 254, if I use scsi add-single-device to this other LUN's, works perfect. I try to set max_scsi_luns, has the same results.
I test with kernel 2.4.9, 2.4.10-ac7, both have the same problem.
With Conectiva Linux Kernel 2.4.5-9cl, he show all LUNS, work fine!
Any Help?
Thank's
Andre - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |