Messages in this thread |  | | Date | Fri, 5 Oct 2001 11:15:58 -0400 (EDT) | From | adrian <> | Subject | Tekram 390U2W and 2.4.10 |
| |
Hello,
I have a Tekram SCSI card I've been using for a while, and it's always had problems in Windows with the newest drivers from Tekram, but works fine with the generic NCR drivers in Windows. I've never had any problems with it in Linux until 2.4.10. If I try something like:
# dd if=/dev/scd1 of=image.iso
I get:
scsi0 channel 0 : resetting for second half of retries. SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0 scsi0: device driver called scsi_done() for a synchronous reset. scsi0 channel 0 : resetting for second half of retries. SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0 scsi0: device driver called scsi_done() for a synchronous reset. SCSI cdrom error : host 0 channel 0 id 4 lun 0 return code = 27070000 I/O error: dev 0b:01, sector 400 scsi0 channel 0 : resetting for second half of retries. SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=0 reset_flags=1 serial_number=0 serial_number_at_timeout=0 scsi0: device driver called scsi_done() for a synchronous reset. SCSI cdrom error : host 0 channel 0 id 4 lun 0 return code = 27070000 I/O error: dev 0b:01, sector 402 ncr53c895-0-<4,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 7) I/O error: dev 0b:01, sector 654 I/O error: dev 0b:01, sector 400
I've tried both NCR and SYMBIOS drivers, but same story. However, I can successfully mount partitions and CDROM's and copy data without errors. And, in 2.4.9, dd'ing works without problems. In Windows, the problem I had was that the SCSI bus would constantly reset itself every 5 or so seconds whenever a device was being access. I don't know if these problems are related, but I thought I'd mention it. I have tried moving the card to another system with a different motherboard, to satisfy curiosity. The problem still exists. I didn't notice any changes in the symbios or ncr drivers. Any ideas? Thanks.
Regards, Adrian
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |