Messages in this thread |  | | Date | Mon, 29 Oct 2001 20:50:43 +0100 | From | Harald Dunkel <> | Subject | Re: 3c59x:command 0x3002 did not complete! Status=0xffff |
| |
PS: The message about '0x3002 did not complete' is gone. I haven't seen it anymore since I added the 'options 3c59x enable_wol=1'.
But now I get this in my syslog:
Oct 29 20:41:19 bilbo pppd[522]: pppd 2.4.1 started by root, uid 0 Oct 29 20:41:20 bilbo pppd[522]: Sending PADI Oct 29 20:41:20 bilbo kernel: eth0: Transmit error, Tx status register 90. Oct 29 20:41:20 bilbo kernel: Flags; bus-master 1, dirty 0(0) current 1(1) Oct 29 20:41:20 bilbo kernel: Transmit list 00000000 vs. df230200. Oct 29 20:41:20 bilbo kernel: 0: @df230200 length 80000020 status 80000020 Oct 29 20:41:20 bilbo kernel: 1: @df230240 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 2: @df230280 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 3: @df2302c0 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 4: @df230300 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 5: @df230340 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 6: @df230380 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 7: @df2303c0 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 8: @df230400 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 9: @df230440 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 10: @df230480 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 11: @df2304c0 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 12: @df230500 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 13: @df230540 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 14: @df230580 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: 15: @df2305c0 length 00000000 status 00000000 Oct 29 20:41:20 bilbo kernel: scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 29 20:41:20 bilbo kernel: scsi0: Data Parity Error Detected during address or write data phase Oct 29 20:41:20 bilbo kernel: scsi1: PCI error Interrupt at seqaddr = 0x9 Oct 29 20:41:20 bilbo kernel: scsi1: Data Parity Error Detected during address or write data phase
Especially interesting is the message about the SCSI. How is this related to the 3c59x?
Regards
Harri - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |