lkml.org 
[lkml]   [2001]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Oops in usb-storage.c
On Tue, Oct 16, 2001 at 11:24:52PM -0700, Matthew Dharm wrote:
> Technically, as long as the system believes that the target exists (i.e.
> you haven't unloaded your SCSI driver module), the target is required to
> respond to an INQUIRY command. So, if you boot with the scanner on, and
> then turn it off, you've got a problem.

Ok. I looked at the SCSI-2 standard and found a possibly sensible answer
for such an INQUIRY to a disconnected device.
First, there is a special peripheral qualifier for disconnected
physical devices:

001b The target is capable of supporting the specified peripheral
device type on this logical unit; however, the physical device
is not currently connected to this logical unit.

Second, the devices is not required to give a complete answer:

NOTES
65 The INQUIRY command is typically used by the initiator after a reset
or power-up condition to determine the device types for system
configuration. To minimize delays after a reset or power-up condition,
the standard INQUIRY data should be available without incurring any
media access delays. If the target does store some of the INQUIRY data
on the device, it may return zeros or ASCII spaces (20h) in those fields
until the data is available from the device.

While this permission to set some fields to zero is included in the
standard for other purposes, it makes clear that you must expect to
get incomplete answers from an INQUIRY command.

So, what about the following patch?

Jan



--- linux-2.4.12-ac3/drivers/usb/storage/usb.c.orig Mon Oct 1 12:15:29 2001
+++ linux-2.4.12-ac3/drivers/usb/storage/usb.c Wed Oct 17 12:33:40 2001
@@ -262,16 +262,28 @@
if (data_len<36) // You lose.
return;

- memcpy(data+8, us->unusual_dev->vendorName,
- strlen(us->unusual_dev->vendorName) > 8 ? 8 :
- strlen(us->unusual_dev->vendorName));
- memcpy(data+16, us->unusual_dev->productName,
- strlen(us->unusual_dev->productName) > 16 ? 16 :
- strlen(us->unusual_dev->productName));
- data[32] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>12) & 0x0F);
- data[33] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>8) & 0x0F);
- data[34] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>4) & 0x0F);
- data[35] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice) & 0x0F);
+ if(data[0]&0x20) { /* USB device currently not connected. Return
+ peripheral qualifier 001b ("...however, the
+ physical device is not currently connected
+ to this logical unit") and leave vendor and
+ product identification empty. ("If the target
+ does store some of the INQUIRY data on the
+ device, it may return zeros or ASCII spaces
+ (20h) in those fields until the data is
+ available from the device."). */
+ memset(data+8,0,28);
+ } else {
+ memcpy(data+8, us->unusual_dev->vendorName,
+ strlen(us->unusual_dev->vendorName) > 8 ? 8 :
+ strlen(us->unusual_dev->vendorName));
+ memcpy(data+16, us->unusual_dev->productName,
+ strlen(us->unusual_dev->productName) > 16 ? 16 :
+ strlen(us->unusual_dev->productName));
+ data[32] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>12) & 0x0F);
+ data[33] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>8) & 0x0F);
+ data[34] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice>>4) & 0x0F);
+ data[35] = 0x30 + ((us->pusb_dev->descriptor.bcdDevice) & 0x0F);
+ }

if (us->srb->use_sg) {
sg = (struct scatterlist *)us->srb->request_buffer;
@@ -389,24 +401,6 @@
break;
}

- /* Handle those devices which need us to fake their
- * inquiry data */
- if ((us->srb->cmnd[0] == INQUIRY) &&
- (us->flags & US_FL_FIX_INQUIRY)) {
- unsigned char data_ptr[36] = {
- 0x00, 0x80, 0x02, 0x02,
- 0x1F, 0x00, 0x00, 0x00};
-
- US_DEBUGP("Faking INQUIRY command\n");
- fill_inquiry_response(us, data_ptr, 36);
- us->srb->result = GOOD << 1;
-
- set_current_state(TASK_INTERRUPTIBLE);
- us->srb->scsi_done(us->srb);
- us->srb = NULL;
- break;
- }
-
/* lock the device pointers */
down(&(us->dev_semaphore));

@@ -422,16 +416,38 @@
usb_stor_sense_notready,
sizeof(usb_stor_sense_notready));
us->srb->result = GOOD << 1;
+ } else if(us->srb->cmnd[0] == INQUIRY) {
+ unsigned char data_ptr[36] = {
+ 0x20, 0x80, 0x02, 0x02,
+ 0x1F, 0x00, 0x00, 0x00};
+ US_DEBUGP("Faking INQUIRY command for disconnected device\n");
+ fill_inquiry_response(us, data_ptr, 36);
+ us->srb->result = GOOD << 1;
} else {
+ memset(us->srb->request_buffer, 0, us->srb->request_bufflen);
memcpy(us->srb->sense_buffer,
usb_stor_sense_notready,
sizeof(usb_stor_sense_notready));
us->srb->result = CHECK_CONDITION << 1;
}
} else { /* !us->pusb_dev */
- /* we've got a command, let's do it! */
- US_DEBUG(usb_stor_show_command(us->srb));
- us->proto_handler(us->srb, us);
+
+ /* Handle those devices which need us to fake
+ * their inquiry data */
+ if ((us->srb->cmnd[0] == INQUIRY) &&
+ (us->flags & US_FL_FIX_INQUIRY)) {
+ unsigned char data_ptr[36] = {
+ 0x00, 0x80, 0x02, 0x02,
+ 0x1F, 0x00, 0x00, 0x00};
+
+ US_DEBUGP("Faking INQUIRY command\n");
+ fill_inquiry_response(us, data_ptr, 36);
+ us->srb->result = GOOD << 1;
+ } else {
+ /* we've got a command, let's do it! */
+ US_DEBUG(usb_stor_show_command(us->srb));
+ us->proto_handler(us->srb, us);
+ }
}

/* unlock the device pointers */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 13:08    [W:0.261 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site