[lkml]   [2001]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] PnP BIOS -- bugfix; update devlist on setpnp
OK, I tried this with the Intel STL2 motherboard I also have and I got
a similar error when trying to load the correct i2c bus module when the
PnPBIOS stuff is compiled into the kernel.

modprobe i2c-piix4
/lib/modules/2.4.10-ac12pnp/kernel/drivers/i2c/i2c-piix4.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.10-ac12pnp/kernel/drivers/i2c/i2c-piix4.o: insmod /lib/modules/2.4.10-ac12pnp/kernel/drivers/i2c/i2c-piix4.o failed
/lib/modules/2.4.10-ac12pnp/kernel/drivers/i2c/i2c-piix4.o: insmod i2c-piix4 failed

i2c-piix4.o version 2.6.1 (20010830)
i2c-piix4.o: Found OSB4 device
i2c-piix4.o: SMB region 0x580 already in use!
i2c-piix4.o: Device not detected, module not inserted.

cat /proc/ioports
04d0-04d1 : PnPBIOS PNP0c02
0580-058f : PnPBIOS PNP0c02
0840-084f : ServerWorks OSB4 IDE Controller
0840-0847 : ide0
0848-084f : ide1
0cd6-0cd7 : PnPBIOS PNP0c02
0cf8-0cff : PCI conf1
5000-50ff : ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC]
5400-543f : Intel Corporation 82557 [Ethernet Pro 100]
5400-543f : eepro100
5440-547f : Intel Corporation 82557 [Ethernet Pro 100] (#2)
5440-547f : eepro100
5800-58ff : Adaptec 7899P
6000-60ff : Adaptec 7899P (#2)
fe00-fe3f : PnPBIOS PNP0c02

So this is a problem on more than just those old Intel Lancewood L440GX
motherboards. The STL2 is a fairly recent dual processor motherboard
Steven A. DuChene
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:08    [W:0.070 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site