[lkml]   [2001]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: kernel not booting when configured for Athlon wrote:
> I've just replace my Pentium-III system with an Athlon-based one, I rebuilt
> the kernel with 'processor Family' changed from 'Pentium III' to Athlon/Duron/K7, and it failed to boot - it goes as far as "OK, booting the kernel" and hangs.
> I can boot a kernel supposedly built for Pentium-III without any apparent problems.

Check the archives. Apparently there is an issue with the highly optimized
Athlon specific memory access/clearing routines that leads to instability on
some motherboards/BIOS revisions.

There is a fix available that seems to clear this up, but it hasn't made it into
the mainstream kernel yet.

The only real difference between Athlon and PIII kernels are some
Athlon-specific optimized assembly-code. The PIII versions still run, just not
quite as fast.


Chris Friesen | MailStop: 043/33/F10
Nortel Networks | work: (613) 765-0557
3500 Carling Avenue | fax: (613) 765-2986
Nepean, ON K2H 8E9 Canada | email:
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:08    [W:0.025 / U:3.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site