Messages in this thread |  | | Date | Mon, 01 Oct 2001 22:09:13 +1000 | From | Eyal Lebedinsky <> | Subject | 2.4.9-ac18: DEBUG (ldm.c, 877)? |
| |
I recently moved from 2.4.10 to 2.4.9-ac18 as I just could not handle the long pauses I get all the time. I noticed this message during partition check. So what is wrong with basic MS-DOS partitions now?
Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA hda: FUJITSU MPD3084AT, ATA DISK drive hdb: QUANTUM FIREBALLlct15 20, ATA DISK drive hdd: Pioneer DVD-ROM ATAPIModel DVD-115 0122, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33) hdb: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33) Partition check: hda:<7>LDM: DEBUG (ldm.c, 877): validate_partition_table: Found basic MS-DOS p artition, not a dynamic disk. hda1 hda2 < hda5 hda6 hda7 > hda3 hda4 hdb:<7>LDM: DEBUG (ldm.c, 877): validate_partition_table: Found basic MS-DOS p artition, not a dynamic disk. hdb1 hdb2 hdb3 hdb4
-- Eyal Lebedinsky (eyal@eyal.emu.id.au) <http://samba.anu.edu.au/eyal/> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |