lkml.org 
[lkml]   [2001]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
On Sat, 27 Jan 2001, Jens Axboe wrote:

> On Sat, Jan 27 2001, Andre Hedrick wrote:
> > > I've been getting this during the boot sequence for quite some time now.
> > > They don't seem to impact the functionality of the drive any though. Just
> > > another extra-verbose kernel message I should ignore? :)
> > >
> > > (This is from the 2.4.1-pre10 btw.)
> > >
> > > hdd: CD-ROM TW 120D, ATAPI CD/DVD-ROM drive
> > > hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
> > > hdd: set_drive_speed_status: error=0x04
> >
> > Means your device did not like that command and barfed.
> > status=0x51, error=0x04 == command aborted next....
>
> My gut tells me that this is the 'get last written' command, and even
> with the quiet flag we get the IDE error status printed. Could you
> try and add
>
> goto use_toc;
>
> add the top of drivers/cdrom/cdrom.c:cdrom_get_last_written() and
> see if that makes the error disappear?

It is an ATA command not ATAPI.

Andre Hedrick
Linux ATA Development

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.024 / U:14.524 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site