lkml.org 
[lkml]   [2001]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: more via-rhine problems.
On Thu, 18 Jan 2001, Mike A. Harris wrote:

> I now believe that it is indeed caused by booting to windows 98
> (by accident). ;o)

Don't do that then :)

> Doesn't matter if a driver is installed in win or not as I've
> tried both. Just booting win at all causes the card to go
> berzerk next boot. Must be something missing from the card init
> code that should be resetting something on the card at init time,
> but which is set by default on power on.

I can't reproduce this, but I only have a 1106:3043 (DFE-530TX revA1) and
tested this on a rather old P133.

I tested 2.2.19pre and not 2.2.18+becker1.08, the biggest difference is
the detection code so maybe that could be worth trying. 2.4 is again a
little bit different ...

You could try playing with bios settings. And dumping register contents
from a working and non-working setup, for example:

% via-diag -aaeemm
(ftp://ftp.scyld.com/pub/diag/via-diag.c)

% lspci -vvxxx -d 1106:3065

Maybe CONFIG_PCI_QUIRKS helps?

/Urban

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:13    [W:0.043 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site