Messages in this thread |  | | Date | Wed, 17 Jan 2001 12:22:25 +0100 (MET) | | From | "Maciej W. Rozycki" <> | | Subject | Re: APIC errors |
| |
On Wed, 17 Jan 2001, Dominik Kubla wrote:
> Just switched to 2.4.0-ac9 (+crypto patches) on our Dual-Pentium MMX > webserver yesterday. Works fine so far, except i keep seeing those > APIC erros (about 14 in 12 hrs) indicating receive, send and CS errors. > > Should i be concerned?
At this volume I would treat this as a warning but not a critical issue. Inter-APIC messages get retransmitted in case of an error, but the checksum circuit is not sophisticated -- a double-bit error might pass unnoticed leading to a system unstability under certain conditions. At such a low volume of errors double-bit ones are not likely to happen.
It's the first report of APIC errors on a P5 system I have seen, so it's probably not a result of a bad motherboard design. I'd recommend to check if the system doesn't get overheated. You may also be unlucky to have a faulty board.
Maciej
-- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available +
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |