[lkml]   [2001]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
I saw the exact same problem on my Adaptec scsi controller.

I initially solved the problem setting the data transfer rate from
80Mb/s to 40MB/s, but I see that yours is already 40MB/s, so this is not
an option for you.

Later I saw an announcement from Justin T. Gibbs, who, I beleive, is
currently developing an opensource driver for Adaptec.
You can find his patches for the Adaptec aic7xxx driver, for both 2.4.0
and 2.2.8 at:

The patch makes all problems go away, and all my dics on the Adaptc
controller is now running at full speed. (Great job Gibbs.)

I hope this helps you.

Anders Fugmann

Igor Mozetic wrote:

> Intel C440GX+ with on-board Adaptec AIC-7896 fails to boot 2.4.0:
> SCSI bus is being reset for host 0 channel 0
> SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
> ... ad infinitum ...

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:14    [W:0.080 / U:26.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site