lkml.org 
[lkml]   [2001]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: ide.2.4.1-p3.01112001.patch
From
On Mon, 15 Jan 2001, Albert Cranford wrote:
> I have a working PA-2007 but use a small hard disk. Can I help.
[...]
> Detected 239.833 MHz processor.
[...]
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[...]
> hda: WDC AC2540F, ATA DISK drive
> hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
> hda: set_drive_speed_status: error=0x04 { DriveStatusError }
> hda: 1056384 sectors (541 MB) w/64KiB Cache, CHS=524/32/63, DMA

I have a FIC PA-2007 (the older one, with a 586A bridge instead of the 586B
of later FIC PA-2007 boards), running at 75MHz FSB (PCI bus runs at 37.5MHz,
so I suppose I should use idebus=37.5 if I were to try 2.4.x), and a Quantum
Fireball lct15 30MB.

It works flawlessly in UDMA mode 2 (although I have to force the drive to
UDMA mode 2 with -X66 before enabling dma, because the bogus beta BIOS I use
sets it to UDMA4 which is not supported by the 586A). Kernel is 2.2.18,
without the 2.4.x ide backport.

The lspci output is exactly the same as yours.

--
"One disk to rule them all, One disk to find them. One disk to bring
them all and in the darkness grind them. In the Land of Redmond
where the shadows lie." -- The Silicon Valley Tarot
Henrique Holschuh
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:17    [W:0.075 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site