Messages in this thread |  | | Date | Mon, 1 Jan 2001 17:07:41 -0500 | From | Andy Galasso <> | Subject | Promise PDC20267 irq timeout |
| |
I'm attempting to use a Promise FastTrak100 in native Ultra100 mode. Anyone have any idea how to get this working?
Linux-2.4.0-prerelease SMP Promise FastTrak100 - no array defined in adapter BIOS 4 IBM DTLA-307030 drives boot params: ide2=0xac00 ide3=0xb400
VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:7.1 ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:pio PDC20267: IDE controller on PCI bus 00 dev 70 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. PDC20267: neither IDE port enabled (BIOS) hde: probing with STATUS(0x50) instead of ALTSTATUS(0xff) hde: IBM-DTLA-307030, ATA DISK drive hdf: probing with STATUS(0x50) instead of ALTSTATUS(0xff) hdf: IBM-DTLA-307030, ATA DISK drive hdg: probing with STATUS(0x50) instead of ALTSTATUS(0xff) hdg: IBM-DTLA-307030, ATA DISK drive hdh: probing with STATUS(0x50) instead of ALTSTATUS(0xff) hdh: IBM-DTLA-307030, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xac00-0xac07,0xae06 on irq 16 ide3 at 0xb400-0xb407,0xb606 on irq 16 (shared with ide2) hde: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdf: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdg: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 hdh: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63 Partition check: hde:hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x50 { DriveReady SeekComplete } ide2: reset: master: error (0x00?) hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x50 { DriveReady SeekComplete } hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } ide2(?): unexpected interrupt, status=0x58, count=1 ide2: reset: master: error (0x00?) hde: status error: status=0x58 { DriveReady SeekComplete DataRequest } end_request: I/O error, dev 21:00 (hde), sector 0 hde: drive not ready for command unable to read partition table hdf:hdf: irq timeout: status=0x50 { DriveReady SeekComplete } hdf: irq timeout: status=0x50 { DriveReady SeekComplete } hdf: irq timeout: status=0x50 { DriveReady SeekComplete } hdf: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } ide2(?): unexpected interrupt, status=0x58, count=2 ide2: reset: master: error (0x00?) hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdf: drive not ready for command hdf: irq timeout: status=0x50 { DriveReady SeekComplete } hdf: irq timeout: status=0x50 { DriveReady SeekComplete } hdf: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } ide2(?): unexpected interrupt, status=0x58, count=3 ide2: reset: master: error (0x00?) hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest } end_request: I/O error, dev 21:40 (hdf), sector 0 hdf: drive not ready for command unable to read partition table ... (similar for hdg ... hdh ...) ...
Thanks,
Andy Galasso andy@adgsoftware.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |