lkml.org 
[lkml]   [2000]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectPCMCIA: cardmgr only reads one socket under 2.4.0-test7
Date
Hello,

I have a Compaq Armada 7400 running Mandrake 7.0 with the kernel 2.4.0-test7
and the pcmcia-3.1.19. I have two PCMCIA sockets in my system and only one
seems to work. I can read the following information in the
/var/log/messages:

pcmcia: Linux PCMCIA Card Services 3.1.11
kernel: options: [pci] [cardbus] [pm]
kernel: modules
kernel: Yenta IRQ list 0698, PCI irq11
kernel: Socket status: 30000020
kernel: Yenta IRQ list 0698, PCI irq11
kernel: Socket status: 30000006
kernel: cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5257
kernel: PCI: Enabling device 02:00.0 (0000 -> 0003)
kernel: PCI: No IRQ known for interrupt pin A of device 02:00.0
pcmcia: cardmgr.
cardmgr[386]: starting, version is 3.1.11
cardmgr[386]: watching 1 sockets

Does it mean only socket 0 is activated ? If yes, why the socket 1 is not
activated ? I have a 3CCFE575CT in the socket 0 and nothing in the socket 1.
If I insert another card in the socket 1, nothing is detected, nothing
happens... I have also two occurences of the [CardBus Watcher] kernel
thread. Is this OK ? The cardctl reports me status and ident only for socket
0.

If somebody can help me, please, let me now.

Thanks a lot,

Claude.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:38    [W:0.025 / U:2.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site