[lkml]   [2000]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectuhci bad, usb-uhci good in test9-pre7
In 2.4.0-test9-pre7, uhci module does not reliably. I have a Logitech
N48 wheel mouse attached, it's the only USB device. I can use the mouse
fine in X via /dev/input interface (except that input moule's reference
count is still zero). But when I switch to text console (and maybe move
the mouse) and switch back to X, the mouse is dead. Unplug+plug cures it
until the next console switch. I have also a PS/2 mouse attached and I'm
using it via gpm on text consoles (if this is of any importance).

usb-uhci module seems to be OK. In 2.2.18pre12 backport, uhci seems to
work also, it's only 2.4 that's broken at the first glance.

USB controller is VIA KT133 onboard USB:
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)

Meelis Roos (

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 12:38    [W:0.050 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site