lkml.org 
[lkml]   [2000]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectToshiba DVD-RAM Problems

Perhaps someone can help me, I have also sent this message to Jens...

I have been trying to get my Toshiba DVD-RAM SD-W1111 to work with linux
kernel 2.2.16.

The drive is recognized by the adaptec controller:
--------------------------------------------------------------------------
Sep 26 15:12:01 gonzo4 kernel: (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI
host adapter> found at PCI 1/3/0
Sep 26 15:12:01 gonzo4 kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255
SCBs
Sep 26 15:12:01 gonzo4 kernel: (scsi0) Downloading sequencer code... 392
instructions downloaded
Sep 26 15:12:01 gonzo4 kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
Sep 26 15:12:01 gonzo4 kernel: <Adaptec AIC-7892 Ultra 160/m SCSI
host adapter>
Sep 26 15:12:01 gonzo4 kernel: scsi : 1 host.
Sep 26 15:12:01 gonzo4 kernel: (scsi0:0:4:0) Synchronous at 10.0
Mbyte/sec, offset 15.
Sep 26 15:12:01 gonzo4 kernel: Vendor: TOSHIBA Model: DVD-RAM SD-W1111
Rev: 1007
Sep 26 15:12:01 gonzo4 kernel: Type: CD-ROM
ANSI SCSI revision: 02
Sep 26 15:12:01 gonzo4 kernel: Detected scsi CD-ROM sr0 at scsi0, channel
0, id 4, lun 0
Sep 26 15:12:01 gonzo4 kernel: sr0: scsi3-mmc drive: 0x/0x dvd-ram cd/rw
xa/form2 cdda tray
Sep 26 15:12:01 gonzo4 kernel: Uniform CD-ROM driver Revision: 3.10
---------------------------------------------------------------------------

and is recognized by cdrecord:
------------------------------------------------------------------------
[root@gonzo4 /]# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) 'TOSHIBA ' 'DVD-RAM SD-W1111' '1007' Removable CD-ROM
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
[root@gonzo4 /]#
--------------------------------------------------------------------------

and I can mount and read regular cdroms so I am pretty sure that the drive
is OK and the device name is OK,

but when I try to format a blank DVD-RAM disk I get:
-----------------------------------------------------------------
[root@gonzo4 /]# mke2fs /dev/scd0
mke2fs 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/scd0 is entire device, not just one partition!
Proceed anyway? (y,n) y
mke2fs: No medium found while trying to determine filesystem size
[root@gonzo4 /]#
-------------------------------------------------------------------

Even though there is a disk in the drive.

Any help you can give would be great...

Thanks!

Dave Rector
drector@lanl.gov
*:^)




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:38    [W:0.027 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site