lkml.org 
[lkml]   [2000]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: hdb errors with 2.2.16
Date
I haven't done either.  I have booted linux in the following manner (no OS
is installed at this point).
1. Turn on Computer
2. Put CD in while RAM is counting
3. view slackware boot prompt
4. press enter
5. watch kernel messages scroll by.
6. format disks
7. -- errors --
Any other ideas? The disk is less than a year old.

-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org]On Behalf Of Andre Hedrick
Sent: Wednesday, September 27, 2000 22:05
To: Alexander Valys
Cc: linux-kernel@vger.kernel.org
Subject: Re: hdb errors with 2.2.16



If you launched out of Windows to install Linux, DON'T do that.
If you have booted into Linux from Windows, DON'T do that.

I can fix a lot of things that MS does to the ATA-Bridge/Chipset but I do
not like to go dorking int the PCI/ISA bridges to fix up issues.

Cheers,

Andre Hedrick
The Linux ATA/IDE guy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:39    [W:0.082 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site