lkml.org 
[lkml]   [2000]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectMounting an cdrom using ide-scsi give wrong major or minor message
Date
I am stumped on this one. I recently installed Mandrake 7.1 on a new drive and
then installed a 2.4.0-test8 kernel. When I boot using the stock kernel
(2.2.15) I can mount my CD-Burner on /dev/scd0. But when I boot to 2.4.0-test8,
mount complains that /dev/scd0 has the wrong major or minor number. I am sure
the correct modules are loading (ide-scsi, sg, and scsi_mod.o).

cat /proc/scsi gives:

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: YAMAHA Model: CRW8824E Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:252 Rev: 3.18
Type: CD-ROM ANSI SCSI revision: 02

The funny thing is, I could have sworn this worked on my old drive using a
hacked version of Mandrake 6.0 and 2.0.0-test8. Unfortunately my old drive died
so I cannot go back and verify this. Any pointers or ideas would be
appreciated.

Doug Rintoul
SIL

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:38    [W:0.029 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site