Messages in this thread |  | | Date | Wed, 20 Sep 2000 14:57:54 -0700 (PDT) | From | Andre Hedrick <> | Subject | Re: EXT2-fs error and geometry walk ... ??? |
| |
Andries,
The crap out is between 2.4.0-test5 and 2.4.0-test6.
It takes four drives that were single partitioned and rips the first 130 blocks out and creates 4 bogus partitions.
Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host0/bus0/target1/lun0: p1 /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 /dev/ide/host2/bus0/target1/lun0: p1 p2 p3 p4 /dev/ide/host2/bus0/target2/lun0: p1 p2 p3 p4 /dev/ide/host2/bus0/target3/lun0: p1 p2 p3 p4
Was
Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host0/bus0/target1/lun0: p1 /dev/ide/host2/bus0/target0/lun0: p1 /dev/ide/host2/bus0/target1/lun0: p1 /dev/ide/host2/bus0/target2/lun0: p1 /dev/ide/host2/bus0/target3/lun0: p1
This is the difference between boots.
Cheers,
Andre Hedrick The Linux ATA/IDE guy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |