Messages in this thread |  | | Date | Wed, 20 Sep 2000 13:15:23 +0200 | From | Dag Bakke <> | Subject | Re: PATCH 2.4.0.9.4: Fix Cardbus |
| |
Jeff Garzik wrote:
> Ok, it's time to get test9 running on my laptop, so I played the "what > code didn't get cut-n-pasted" game. > > With the attached tested patch against 2.4.0-test9-pre4, CardBus is > working again for me. This patch makes the logic match that of the old > code.
Well. Still doesn't work for me. So I tested 2.2.17 and pcmcia-cs 3.1.20.
# lsmod Module Size Used by tulip_cb 32092 0 (unused) cb_enabler 2504 1 [tulip_cb] ds 6440 2 [cb_enabler] i82365 22420 2 pcmcia_core 50912 0 [cb_enabler ds i82365]
[These are the correct modules, right? Loaded by hand, as 'make install' in pcmcia-cs appears to be a little confused by the latest kernel module reorg.]
# dmesg [snip] Linux PCMCIA Card Services 3.1.20 kernel build: 2.2.17 #1 Wed Sep 20 09:32:23 CEST 2000 options: [pci] [cardbus] [apm] [pnp] PCI routing table version 1.0 at 0xfbda0 00:03.0 -> irq 11 00:03.1 -> irq 11 PnP: PNP BIOS installation structure at 0xc00fe2d0 PnP: PNP BIOS version 1.0, entry at f0000:e2f4, dseg at 40 Intel PCIC probe: TI 1225 rev 01 PCI-to-CardBus at slot 00:03, mem 0x68000000 host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 32/34] host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 35/37] ISA irqs (scanned) = 3,7,9,10 PCI status changes cs: cb_alloc(bus 35): vendor 0x115d, device 0x0003
[/etc/init.d/pcmcia start] cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. ROM image dump: cs: no valid ROM images found!
Same problem, or different problem? This time, the card is not even detected...
Dag B - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |