lkml.org 
[lkml]   [2000]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectBug report: sbpcd.o module in 2.4.0-test6 ignores sbpcd= arg
(Reposting -- this seems lost in the mailing list changeovers :^)
(I'm not subscribed, please e-mail replies directly to me)

System: PII-400, 128MB RAM, Asus P2B-F mobo, Creative Labs SB16 MCD
sound/CD interface card, Panasonic model CR-562 (old 2x proprietary
interface) CD-ROM drive.

When built into the kernel, the sbpcd driver uses the boot prompt
"sbpcd=0x250,1" (or "sbpcd=0x250,SoundBlaster") properly and finds
my Panasonic CR-562 CD-ROM drive fine.

When build as a module and inserted using modprobe or insmod,
sbpcd.o ignores the "sbpcd=0x250,1" argument string. Instead it
probes 0x340,SoundBlaster *exactly*twice* then fails. I observed
the same behavior in the (late) 2.3 kernels.

Please contact me directly for more info or any testing. Thanks.

Clemmitt Sigler

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:38    [W:0.029 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site