Messages in this thread |  | | Date | Tue, 22 Aug 2000 23:49:28 +1000 | From | Andrew Morton <> | Subject | Re: DEC21150 bridge and unsupported 3COM NIC |
| |
Tigran Aivazian wrote: > > ... > Also, what about the "unknown 3COM 5257 device" - the one on the docking > station - is someone working on the driver? The existing drivers don't seem > to support it.
It's a 3CCFE575CT Cardbus NIC. In 2.4 it is supported by 3c59x.c. In 2.2 it is supported by 3c575_cb.c from the pcmcia_cs package.
I guess you need to copy /usr/src/linux/drivers/pci/pci.ids onto /usr/share/pci.ids so lspci has an up-to-date database.
> ... > > 20:00.0 Ethernet controller: 3Com Corporation: Unknown device 5257 (rev 10) > Subsystem: 3Com Corporation: Unknown device 5c57 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 10 min, 5 max, 0 set, cache line size 08 > Interrupt: pin A routed to IRQ 3 > Region 0: I/O ports at 0200 > Region 1: Memory at 60021000 (32-bit, non-prefetchable) > Region 2: Memory at 60020000 (32-bit, non-prefetchable) > Expansion ROM at 60000000 [disabled] > Capabilities: [50] Power Management version 1 > Flags: PMEClk- AuxPwr+ DSI- D1+ D2+ PME- > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > 00: b7 10 57 52 07 00 10 02 10 00 00 02 08 00 00 00 > 10: 01 02 00 00 00 10 02 60 00 00 02 60 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 90 00 00 00 b7 10 57 5c > 30: 01 00 00 60 50 00 00 00 00 00 00 00 03 01 0a 05
lspci is reading the device ID from offsets 0x2f/0x2e, not from 0x03/0x02. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |