lkml.org 
[lkml]   [2000]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: xircom_tulip_cb not working in pre9, pre10
Date
From
In article <Pine.LNX.4.21.0008101035330.975-100000@pau.intranet.ct> you write:
>It works in test6-pre6
>The message I get now is:

>PCI: Setting latency timer of device 02:00.0 to 64
>PCI: Error while updating region 02:00.1/2 (00001081 != 00001000)
>PCI: Enabling device 02:00.1 (0000 -> 0003)

I'm also haveing trouble with the xircom_tulib_cb in test6, I get
these messages:

: tulip_attach(01:00.0)
: PCI: Setting latency timer of device 01:00.0 to 64
: xircom_tulip_cb.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified \
by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x1400, \
00:00:00:00:00:00, IRQ 9.

Note the mac-address, and the link etc lights on my dongle don't light
up.

- Regards, Robert.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.090 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site