Messages in this thread | | | Date | Fri, 3 Mar 2000 17:44:54 -0800 (PST) | From | Andre Hedrick <> | Subject | Re: DMA still impossible on K7M mb - VIA chipset |
| |
VIA chipsets are not supported in the kernel for ATA-66... It was only two days ago I got any info out of VIA.
On Fri, 3 Mar 2000, Marco Meloni wrote:
> > I just compiled kernel 2.3.49 but things are going in the same way. > This is the output of the hdparm -d 1 /dev/hda command: > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > hda: DMA disabled > ide0: reset: success > > obviously, I compiled with the experimental support for via chipset > and the cable is the right one needed for ata/66. > > thanks in advance, > marco > > ------- > A volte mi piacerebbe tornare indietro / la' dove e' rimasta la vita > correre coi pattini sulle rive dell'oceano / giocare con lei finche' > non sara' finita > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.rutgers.edu > Please read the FAQ at http://www.tux.org/lkml/ >
Andre Hedrick The Linux ATA/IDE guy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |