Messages in this thread | | | Date | Tue, 28 Mar 2000 10:35:48 -0500 | From | Doug Ledford <> | Subject | Re: 2.2.15pre15 boot failure - aic7xxx |
| |
Gregory Zornetzer wrote: > > Sorry to be the bringer of bad news about 2.2.15pre15, but it fails to > boot on my old EISA machine with an Adaptec 2740 (the EISA version) > The aic7xxx driver version in 5.1.28, the default driver in 2.2.15pre15. > > I get a normal detection of SCSI devices, and then I see > > (scsi 0) BRKADRINT error(0x2) > Illegal Sequencer Address referenced > (scsi 0) SEQADDR = 0x1
SEQADDR 1 doesn't reference a call to anything so there shouldn't be a possibility of an Illegal Sequencer Address (if a jump is out of range, then you get this error basically). I'll see if I can track it down.
> Kernel panic: aic7xxx: unrecoverable BRKADDRINT > In swapper task, not syncing. > > The older 5.1.23 driver works fine. If there's any other debugging info > that I can provide, please let me know. > > Thanks, > > Greg Zornetzer > gaz@nmrfam.wisc.edu
--
Doug Ledford <dledford@redhat.com> http://people.redhat.com/dledford Please check my web site for aic7xxx updates/answers before e-mailing me about problems
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |