lkml.org 
[lkml]   [2000]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ATAPI Zip problems
On Mon, Mar 13, 2000 at 00:52:35 +0100 (+0000), Guest section DW wrote:
> On Sun, Mar 12, 2000 at 09:24:42PM +0000, Riley Williams wrote:
>
> > Incidentally, when I put a Zip-100 disk in the drive, the two
> > values are approximately 250M and approximately 100M
> > resspectively, and when I put a Zip-250 in, they are DIFFERENT
> > numbers, but both approx 250M.
>
> People tell me they see
> "The drive reports both 250609664 and 250640384 bytes as its capacity"

I get this with my ATAPI drive (2.2.14pre18):

hdd: 98288kB, 196576 blocks, 512 sector size
hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdd: The drive reports both 100663296 and 100646912 bytes as its capacity
hdd: unknown partition table

$ mount |grep zip
/dev/hdd on /zip type ext2 (rw,noexec,nosuid,nodev,user=bridgett)

The reason it's /dev/hdd is that on another computer I have a parallel port
Zip drive and over there I mount /dev/sda1. The ATAPI drives are supposed
to come with a jumper to stop them from skipping over the partition table,
but mine (IBM OEM) didn't :-(

HTH


Adrian

email: adrian.bridgett@iname.com, http://www.poboxes.com/adrian.bridgett
Windows NT - Unix in beta-testing. PGP key available on public key servers
Debian GNU/Linux -*- because I'm allergic to Prozac -*- www.debian.org

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:2.856 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site