Messages in this thread | | | Date | Mon, 07 Feb 2000 17:40:37 +0100 | From | Matthias Andree <> | Subject | Re: Problems with Athlon and UDMA 33 |
| |
Jeremy Sanders wrote: > > Hi, > > We've got a new Athlon machine (700MHz), running RH6.1 and 2.2.14 (nfs3 > client patches) with a Microstar MSI 6167 motherboard. The UDMA on the IBM > hard drives appears not to work. The kernel seems to find DMA capability > on booting, but does not enable it. Enabling it with hdparm hangs the > machine when you start using it.
We have a similar setup, but with an Athlon/500 and a 13 GB Seagate ST313032A.
I have added the ide patches from ftp.XX.kernel.org/pub/linux/kernel/people/hedrick/ and have that drive running smoothly with DMA since then.
XX is your top-level-domain code, try uk in your case.
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>AMD7409: IDE controller on PCI bus 00 dev 39 <4>AMD7409: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio <4>hda: ST313032A, ATA DISK drive <4>hdc: TOSHIBA CD-ROM XM-6602B, ATAPI CDROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: UDMA 0xc0 PIO 0x20 :: UDMA 0x40 PIO 0x20 <6>hda: ST313032A, 12419MB w/512kB Cache, CHS=1583/255/63, UDMA(33) <4>hdc: UDMA 0xc0 PIO 0x20 :: UDMA 0x40 PIO 0x20 <4>hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |