Messages in this thread | | | Date | Thu, 17 Feb 2000 12:49:10 +1100 | From | Richard Gooch <> | Subject | Re: PCMCIA still doesn't work for 2.3.46-pre2 |
| |
Linus Torvalds writes: > > > On Thu, 17 Feb 2000, Richard Gooch wrote: > > > > Well, at the moment I'm using my other network card with 2.3.46-pre2 > > and it's working: > > > > Linux PCMCIA Card Services 3.1.11 > > options: [pci] [cardbus] [apm] > > Adding cardbus controller 0: PCI device 104c:ac15 > > PCI: Enabling device 00:04.0 (0000 -> 0002) > > Yenta IRQ list 0e98, PCI irq0 > > Look, now you still don't have a PCI interrupt, but magically the ISA > interrupts _do_ show up.
Hm. Yeah.
> > The difference seems to be that this card is 16 bit, whereas the other > > card is (it had better be!) 32 bit. > > Strange. The ISA interrupts should show up regardless of whether a CardBus > or 16-bit PCMCIA card is inserted. > > I wonder if it matters which card you had at bootup? Ie boot up with > the 16-bit card, and then switch to the 32-bit one..
I've just done that. I had the 16 bit card in there until after the kernel booted (started init), but before cardmgr ran I swapped and put in the (supposedly) 32 bit card. It now works! Bit of a kludge, though.
Regards,
Richard.... Permanent: rgooch@atnf.csiro.au Current: rgooch@ras.ucalgary.ca
Linux PCMCIA Card Services 3.1.11 options: [pci] [cardbus] [apm] Adding cardbus controller 0: PCI device 104c:ac15 PCI: Enabling device 00:04.0 (0000 -> 0002) Yenta IRQ list 0e98, PCI irq0 Socket status: 30000010 Adding cardbus controller 1: PCI device 104c:ac15 PCI: Enabling device 00:04.1 (0000 -> 0002) Yenta IRQ list 0698, PCI irq0 Socket status: 30000006 [...] cs: IO port probe 0x038c-0x03ff: excluding 0x3c4-0x3e3 0x3ec-0x403 cs: IO port probe 0x0230-0x0387: excluding 0x378-0x37f cs: IO port probe 0x0100-0x021f: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) eth0: autonegotiation failed; using 10mbs eth0: MII selected eth0: media 10BaseT, silicon revision 5 eth0: Compaq: port 0x300, irq 3, hwaddr 00:08:C7:64:1D:C4 ttyS03 at port 0x02e8 (irq = 3) is a 16550A eth0: MII link partner: 0021 eth0: MII selected eth0: media 10BaseT, silicon revision 5
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |