lkml.org 
[lkml]   [2000]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch-2.3.46-p2] P6 microcode update support
Date
From
Rogier Wolff wrote:
> Tigran Aivazian wrote:
> > One could go and tweak that data after the update. But even if not
> > (export restrictions (kernel->modules), it is still better to have a
> > bugfree CPU reported as buggy than to have a buggy CPU reported as such?
>
> I think that the best way to report this is something like:
>
> stepping : 14 (5)
>
> meaning that the stepping is now 14, but the hardware is level 5.

.... On the other hand, you don't know what is "below" the 5, as the
BIOS may have upgraded a stepping 3 CPU to a stepping 5. Short of
intercepting the CPU right after reset there is nothing you can do to
determine the hardware level, right?

Roger.

--
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* Common sense is the collection of *
****** prejudices acquired by age eighteen. -- Albert Einstein ********

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:56    [W:0.148 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site